The DTH is the abbreviation of Down The Hole and sometimes it is also called RAB in some markets, then the RAB is short for Rotary Air Blasting.
DTH (down-the-hole) drilling involves a drilling hammer at the bottom of a drill string, the hammer is powered by compressed air transmitted via drilling rod to drive piston and produce impact power, which is then delivered into rocks for drilling and crushing. DTH drilling can be applied in mining, quarrying, water well drilling, foundation piling, etc. DTH hammer uses compressed air to produce impact power, thus to drive drill bits to crush rocks.
• Premium material, fine CNC and heat-treatment manufacturing processes and optimized design;
• Good stability and reliability;
• High impact frequency;
• Lowered compressed air consumption;
• Long lifespan
Mining, quarrying, water well drilling, geothermal well drilling, foundation piling, etc.
| Net weight | Out diameter | GSE-QL40 DTH hammer length without bits | ||
| 39.5 kg | 99 mm | 953 mm | ||
| Rec. hole size | Working pressure | Air consumption: M3(CBM)/min | ||
| 105mm – 130mm | 8 bar – 25 bar | @ 10 bar | @ 18 bar | @ 24 bar |
| 5 | 10.2 | 15 | ||
| Net weight | Out diameter | GSE-QL50 DTH hammer length without bits | ||
| 74 kg | 126 mm | 1008mm | ||
| Rec. hole size | Working pressure | Air consumption: M3(CBM)/min | ||
| 133mm – 152mm | 8 bar – 30 bar | @ 10 bar | @ 18 bar | @ 24 bar |
| 7.5 | 14.7 | 19.5 | ||
| Net wight | Out diameter | GSE-QL60 DTH hammer length without bits | ||
| 110 kg | 144 mm | 1081 mm | ||
| Rec. hole size | Working pressure | Air consumption: M3(CBM)/min | ||
| 152mm – 254mm | 8 bar – 30 bar | @ 10 bar | @ 18 bar | @ 24 bar |
| 8.7 | 14.5 | 25 | ||
| Net weight | Out diameter | GSE-QL80 DTH hammer length without bits | ||
| 182 kg | 182 mm | 1210 mm | ||
| Rec. hole size | Working pressure | Air consumption: M3(CBM)/min | ||
| 194mm – 305mm | 8 bar – 35 bar | @ 10 bar | @ 18 bar | @ 24 bar |
| 12 | 26 | 35 | ||
