Struggling with unstable drilling in tough, abrasive ground? Our 4 Wings Chevron Drag Bits deliver superior stability and efficient cutting. Achieve straighter, more consistent boreholes, even in challenging formations.
4 wings chevron type drag bits are one-piece construction of alloy steel cast with tungsten carbide cutting tips and gauge sides to ensure longer life. It has 4 wings and 4 flushing holes. 4 wings chevron drag bits are more durable and last longer than 3 wings chevron drill bits, because of cutting structure, but will penetrate more slowly. Additionally, 4-wing chevron drag bits are more stable and tend toward drilling a straighter hole. Its flushing hole is incorporated into our design for efficient removal of cuttings.
4-wing chevron drag bits are economical tools when drilling softer geological formations and shallower depths. They are primarily designed for medium to hard formations and are used in areas that contain a lot of rock, such as hard shale, limestone, and tougher gravels etc. And also chevron drag bits are recommended for drilling in Mining, Exploration, Environmental, Water well, Geo Exchange, etc.
4 Wings Chevron Drag Bits are engineered to provide enhanced stability and durability when drilling in medium to hard, more abrasive formations. Their four-wing design, compared to three-wing counterparts, offers greater contact with the borehole, promoting straighter holes and reducing deviation. This makes them particularly effective in areas containing significant rock content or where concrete and plugs may be encountered.
The robust construction and precise manufacturing details of these bits ensure prolonged service life and consistent performance in demanding conditions.
4 Wings Chevron Drag Bits | ||
Diameter | Thread | |
6 1/2 to 12 inch | 165.1 to 304.8 mm | Optional |
Note: The diameter and thread shown above are the usual size; other sizes are available upon request.
Thread size: 2 3/8” API Reg, 2 7/8” API Reg, 3 1/2” API Reg, 4 1/2” API Reg, 6 5/8” API Reg, 2” API IF, 2 3/8” API IF, 2 7/8” API IF, A Rod, N Rod, AW, BW, NW, AWJ, BWJ, NWJ.